美国怡春院怡春院分院动态

联系我们

conww.jpg

美国怡春院怡春院分院: 山东绵邈园林美国怡春院工程有限美国怡春院怡春院分院

联系人:于经理

手 机: 18354188859

地址:山东省济南市高新区天辰路979号办公楼1-101

美国怡春院怡春院分院动态

您的当前位置: 首页>新闻动态>美国怡春院怡春院分院动态>玻璃钢美国怡春院分院不可缺少的三种清洁方式

玻璃钢美国怡春院分院不可缺少的三种清洁方式

发布日期: 2020-07-02 来源: 点击: 发布人:mianmao

玻璃钢美国怡春院分院是我们生活中常见美国怡春院分院的一种,清洁工作是玻璃钢美国怡春院分院的重要准备工作,制品美观漂亮、外观质量好坏与否均与清洁工作密切相关。

FRP sculpture is one of the common sculptures in our life. Cleaning is an important preparatory work for FRP sculpture. The beauty and appearance quality of the products are closely related to the cleaning work.
一、玻璃钢美国怡春院分院环境清洁:施工现场应每日清洗。废旧树脂、物件及时处理;飞扬的灰尘、生产中的碎片粘在湿态树脂上,均会影响制品质量。
1、 Clean the construction site every day. The waste resin and articles should be treated in time; the flying dust and the fragments in production stuck on the wet resin will affect the product quality.
二、玻璃钢美国怡春院分院工具清洁:生产工具应设专人清理,既利于操作,又避免因一具上有树脂结块、易掉落颗粒、泥尘等导致生产时影响玻璃钢的质量。
2、 Cleaning of glass fiber reinforced plastic sculpture tools: the production tools should be cleaned by special personnel, which is not only convenient for operation, but also can avoid affecting the quality of glass fiber reinforced plastic due to resin caking, falling particles, mud and dust.
三、玻璃钢美国怡春院分院模具清洁:模具表面使用前必须清理,用清洁剂和清水反复冲洗(忌用对树脂有溶解作用的丙 酮等清洗剂),要使玻璃钢达到镜面效果,模面上的一切尘埃、微粒、油迹都应去除。
3、 Cleaning of glass fiber reinforced plastic sculpture mold: the mold surface must be cleaned before use, and repeatedly rinsed with cleaning agent and water (do not use acetone and other cleaning agents which can dissolve the resin). To make the glass fiber reinforced plastic achieve the mirror effect, all dust, particles and oil stains on the mold surface should be removed.
玻璃钢美国怡春院分院清洁的具体操作如下:
The specific operation of FRP sculpture cleaning is as follows:
1、交付使用的任何工具,都应是干燥的。
1. Any tools delivered for use should be dry.
2、工具上的残存树脂清除后,工具可放在封闭的容器内,用丙酮浸泡(玻璃钢制的工具除外)备用。
2. After the residual resin on the tool is removed, the tool can be placed in a closed container and soaked in acetone (except for the tool made of glass fiber reinforced plastic) for standby.
3、盛胶衣的专用容器,每次用完都要清洗,不允许有结皮及颗粒存在,也不允许为了方便清洗而在器具内壁涂蜡。
3. The special container for holding gel coat should be cleaned every time it is used up. It is not allowed to have crusts and particles, and it is not allowed to apply wax on the inner wall of the appliance for the convenience of cleaning.
4、打蜡用的毛巾和羊毛垫子,要用热的肥.皂水或清洁剂清洗,再经过清水过净、干燥后才能使用。清洁剂也有用热的纯碱水溶液来代用,要改变使用价格较贵又危险的丙酮作为清洁剂的习惯。
4. Waxing towel and wool mat should be cleaned with hot fat, soap or detergent, and then cleaned and dried with water before use. The detergent can also be replaced by hot soda water solution. It is necessary to change the habit of using expensive and dangerous acetone as cleaning agent.
5、为配料工和糊制工提供清洁的工具,并做好工具使用情况及损坏情况记录。
5. Provide cleaning tools for batcher and paste maker, and record the usage and damage of tools.

在线客服
  • 客户怡春院10次
  • 售后怡春院10次
二维码

扫描二维码

分享